Tubemiter.exe - by Giles Puckett
A tube mitering program
for Windows to print on any printer. The program works with metric units.
up a dialog box. You input:
* Diameter (in mm)
of tube being mitered
* The wall thickness of this tube
* The second tube diameter (the one it abuts up to)
* The included angle in degrees.
It paints the picture
on the window, and File/Print... prints it on any connected printer.
There are two curves
- the dotted one is the template you would cut if the wall thickness were
zero (similar to the
HyperCard program's output) and the solid curve is the template corresponding
to the requested wall thickness.
If the mitered tube
diameter is greater than the second diameter, then the second tube passes
through two holes in the mitered tube. This situation is handled by continuing
the template on the other side. Small gaps may appear in the curves; this
is a known "feature" of the way the program works.